DOE O 210.1, Performance Indicators and Analysis of Operations Information
Functional areas: Information Technology
To identify, monitor, and analyze data that measures the Environment,
Safety and Health (ES&H) performance of facilities, programs, and organizations.
Cancels DOE 5480.26
Supersedes:
Version history and related documents
Supersedes
Earlier documents this one replaced.
Document text
Text extracted from the attached file. Refer to the original document for the authoritative version.
Section 1
U.S. Department of Energy ORDER
Washington, D.C. DOE O 210.1
Approved: 09-27-95
Sunset Review: 09-27-97
SUBJECT: PERFORMANCE INDICATORS AND ANALYSIS Expires: 09-27-99
OF OPERATIONS INFORMATION
____________________________________________________________________________
1. OBJECTIVES. To identify, monitor, and analyze data that measures the Environment,
Safety and Health (ES&H) performance of facilities, programs, and organizations.
These data are to be used to demonstrate improving or deteriorating performance
relative to identified goals and, in conjunction with a program to analyze and correlate
data, as a means to suggest further improvement through the identification of good
practices and lessons learned.
2. CANCELLATION. Cancellation of an Order does not, by itself, modify or otherwise
affect any contractual obligation to comply with such an Order. Canceled Orders that
are incorporated by reference in a contract shall remain in effect until the contract is
modified to delete the reference to the requirements in the canceled Orders. The
following Order has been canceled by this Order: DOE 5480.26, TRENDING AND
ANALYSIS OF OPERATIONS INFORMATION USING PERFORMANCE INDICATORS, of
1-15-93.
3. APPLICABILITY.
a. DOE Elements. Except for the exclusion in paragraph c, this Order applies to all
DOE elements.
b. Contractors. The attached Contractor Requirements Document (CRD) sets forth
requirements that are to be applied to contractors awarded contracts for the
operation and management of DOE-owned and leased facilities. Contractor
compliance with the CRD will be required to the extent set forth in the contract.
Contractors shall be directed to continue to comply with the requirements of the
Order canceled by this Order until their contracts are modified to delete the
reference to the requirements of the canceled Order.
c. Exclusions. Activities conducted under the authority of the Director, Naval Nuclear
Propulsion Program, as described in Public Law 98-525 are exempt from the
provisions of this Order.
4. REQUIREMENTS. All DOE Elements shall do the following:
a. Establish a program that identifies, gathers, verifies, analyzes, trends, disseminates,
and makes use of ES&H performance indicators to improve the performance of DOE
facilities, programs, and organizations.
______________________________________________________________________________
DISTRIBUTION: INITIATED BY:
All Departmental Elements Office of Environment, Safety
and Health
CANCELE
D
2 DOE O 210.1
9-27-95
b. Gather, verify, analyze, trend, and disseminate ES&H performance indicator data,
including narrative data, which can help assess performance; where appropriate,
perform root cause analyses.
c. Implement feedback mechanisms for identification and communication of ES&H
good practices, lessons learned, and corrective actions.
d. Maintain a management information system containing appropriate ES&H
performance indicator data for historical reference.
e. Periodically assess ES&H performance indicator programs to verify that indicators
are accurately measuring performance and are resulting in improved performance.
5. RESPONSIBILITIES.
Section 2
a. DOE shall use analytical ES&H data to base decisions, establish goals, identify
performance trends, provide early identification of potential problems, and apply
lessons learned and good practices.
b. DOE shall develop incentives to encourage contractors in the achievement of
desired levels of ES&H performance in critical areas through the use of ES&H
performance indicators.
c. Field Elements are responsible for determining whether adequate protection can
most effectively be achieved by continuing to operate under the terms of existing
contracts requiring compliance with old Orders or by modifying the contract to
incorporate the requirements of revised Orders.
d. Field Elements are responsible for determining that implementation of new rule or
Order requirements will provide adequate protection prior to requesting contract
modification to drop old Order requirements from the contract.
6. CONTACT. Office of Operating Experience Analysis and Feedback (EH-33),
(301) 903-8371.
BY ORDER OF THE SECRETARY OF ENERGY:
ARCHER L. DURHAM
Assistant Secretary for
Human Resources and Administration
CANCELE
D
DOE O 210.1
9-27-95
Attachment 1
Page 1 (and Page 2)
CONTRACTOR REQUIREMENTS DOCUMENT
PERFORMANCE INDICATORS AND ANALYSIS OF OPERATIONS INFORMATION
In the performance of this contract, the contractor shall identify, monitor,
and analyze data that measure the Environment, Safety and Health (ES&H)
performance of facilities, programs, and organizations. These data are to be
used to demonstrate improving or deteriorating performance relative to
identified goals and in conjunction with a program to analyze and correlate
data, as a means to suggest further improvement through the identification of
good practices and lessons learned.
The contractor shall do the following:
1.
2.
3.
4.
5.
6.
7.
Establish a program that identifies, gathers, verifies, analyzes,
trends, disseminates, and makes use of ES&H performance indicators to
improve the performance of D0E facilities, programs, and organizations.
Gather, verify, analyze, trend, and disseminate ES&H performance
indicator data, including narrative data, which can help assess
performance; where appropriate, perform root cause analyses.
Use analytical ES&H data to base decisions, establish goals, identify
performance trends, provide early identification of potential problems,
and apply lessons learned and good practices.
Implement a feedback mechanism for the identification and communication
of ES&H lessons learned, good practices, and corrective actions.
Maintain a management information system containing appropriate ES&H
performance indicator data for historical reference.
Periodically assess ES&H performance indicator programs to verify that
indicators are accurately measuring performance and are resulting in
improvements to performance.
Prepare and submit an implementation elan to the approving organization
within 180 days of the effective date of this Order, unless an extension
is granted. If the contract between the DOE and the contractor contains
agreed upon requirements for performance indicators/measures, then the
implementation plan requirement is fulfilled and an implementation plan
is not required.
The contractor shall direct compliance with these requirements to the extent
incorporated into contract.
CANCELE
D