DOE G 441.1-11, Occupational Radiation Protection Record-Keeping and Reporting Guide for use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection
Functional areas: Work Processes
This Guide provides an acceptable methodology for establishing and operating an occupational radiation protection record-keeping and reporting program that will comply with U.S. Department of Energy (DOE) requirements specified in Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection.
Canceled by DOE G 441.1-1B.
Superseded By:
DOE G 441.1-1B, Radiation Protection Programs Guide on Mar 01, 2007
Version history and related documents
Superseded by
A newer version replaces this document.
- DOE G 441.1-1BRadiation Protection Programs Guide (Mar 01, 2007)
Document text
Text extracted from the attached file. Refer to the original document for the authoritative version.
Section 1
DOE G 441.1-11
(formerly G-10 CFR 835/H1)
05-20-99
OCCUPATIONAL RADIATION
PROTECTION RECORD-KEEPING
AND REPORTING GUIDE
for use with
Title 10, Code of Federal Regulations, Part 835,
Occupational Radiation Protection
Assistant Secretary for Environment,
Safety and Health
(THIS PAGE INTENTIONALLY LEFT BLANK)
DOE G 441.1-11 i
05-20-99
CONTENTS
CONTENTS PAGE
1. PURPOSE AND APPLICABILITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2. DEFINITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3. DISCUSSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4. IMPLEMENTATION GUIDANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1 RECORDS TO BE GENERATED AND MAINTAINED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1.1 Individual Monitoring and Dose Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
4.1.2 Monitoring and Workplace Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.1.3 Administrative Records . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4.2 REPORTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.2.1 Reports to Individuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2.2 Reports of Planned Special Exposures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3 PRIVACY ACT CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3.1 Informing Individuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3.2 Identifying Individuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.3.3 Requesting Correction or Amendment of a Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.3.4 Responding to Requests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.3.5 Accounting for Disclosures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4 RECORD-KEEPING STANDARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. REFERENCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6. ATTACHMENT 1
Request for Changes to Occupational Radiation Protection Record-Keeping
and Reporting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1
ii DOE G 441.1-11
05-20-99
ACRONYMS
Section 2
AEC U.S. Atomic Energy Commission
ALARA as low as is reasonably achievable
ANSI American National Standards Institute
CEDE committed effective dose equivalent
CFR Code of Federal Regulations
CTEDE cumulative total effective dose equivalent
DAC derived air concentration
DOE U.S. Department of Energy
DOE G DOE Guide
dpm disintegrations per minute
FOIA Freedom of Information Act
NCRP National Council on Radiation Protection and Measurements
NRC U.S. Nuclear Regulatory Commission
PSE planned special exposure
RCS DOE-STD-1098-99, RADIOLOGICAL CONTROL
RPP documented Radiation Protection Program
RWP radiological work permit
TEDE total effective dose equivalent
DOE G 441.1-11 1
05-20-99
OCCUPATIONAL RADIATION PROTECTION
RECORD-KEEPING and REPORTING
1. PURPOSE AND APPLICABILITY
This Guide provides an acceptable methodology for establishing and operating an occupational radiation protection
record-keeping and reporting program that will comply with U.S. Department of Energy (DOE) requirements
specified in Title 10 of the Code of Federal Regulations (CFR), Part 835, Occupational Radiation Protection (DOE
1998a), hereinafter referred to as 10 CFR 835. This Guide provides cross-references to other Guides, DOE-STD-
1098-99, RADIOLOGICAL CONTROL (DOE 1999a), hereinafter referred to as the RCS, DOE directives, and
industry consensus standards that provide detailed guidance for implementing specific requirements in 10 CFR
835.
This Guide provides guidance with respect to implementing the provisions for record-keeping contained in Subpart
H of 10 CFR 835 and the provisions for reports to individuals contained in Subpart I of 10 CFR 835. Specific
regulatory citations are provided in the body of this Guide. In addition, this Guide discusses certain occupational
radiation protection record-keeping and reporting requirements found in 10 CFR 1008, Records Maintained on
Individuals (Privacy Act) (DOE 1980), and in the Freedom of Information Act (FOIA 1986).
This Guide amplifies the regulatory requirements of 10 CFR 835 and provides explanations and examples of the
basic requirements for record-keeping and reports to individuals. The requirements of 10 CFR 835 are enforceable
under the provisions of Sections 223(c) and 234A of the Atomic Energy Act of 1954, as amended (AEC 1954).
Except for requirements established by a regulation, contract, or by administrative means, the provisions in this
Guide are DOE's views on acceptable methods of program implementation and are not mandatory. Conformance
with this Guide will, however, create an inference of compliance with the related regulatory requirements.
Alternate methods that are demonstrated to provide an equivalent or better level of protection are acceptable. DOE
encourages its contractors to go beyond the minimum requirements and to pursue excellence in their programs.
The word "shall" is used in this Guide to designate requirements from 10 CFR 835. Compliance with 10 CFR 835
is mandatory, except to the extent an exemption has been granted pursuant to 10 CFR 820, Procedural Rules for
DOE Nuclear Activities (DOE 1997a). The words “should” and “may” are used to denote optional program
recommendations and allowable alternatives, respectfully.
This Guide is applicable to all DOE activities that are subject to the requirements of 10 CFR 835.
2 DOE G 441.1-11
05-20-99
2. DEFINITIONS
Terms defined in 10 CFR 835 are used in this Guide consistent with their regulatory definitions.
Section 3
Total organ dose equivalent: For any organ or tissue assigned an internal dose during the year, the sum of the
deep dose equivalent from external exposures and the committed dose equivalent to that organ or tissue from
intakes received during the year.
DOE G 441.1-11 3
05-20-99
3. DISCUSSION
This Guide provides instructions for implementing a program that will meet DOE requirements for generating,
administering, and retaining occupational radiation protection records and reports. Complete and accurate
radiation protection records are necessary to:
• provide information used to protect individuals from radiation exposure;
• evaluate the effectiveness of the radiation protection program;
• demonstrate compliance with regulations and requirements; and
• defend the radiation protection program against unwarranted litigation.
Supporting guidance useful in developing and implementing occupational radiation protection record-keeping
programs is provided in American National Standards Institute (ANSI) Standard N13.6, American National
Standard Practice for Radiation Exposure Records Systems (ANSI 1989) and NCRP Report No. 114, Maintaining
Radiation Protection Records (NCRP 1992). These documents should be used in concert with this Guide and 10
CFR 835 because they may not address every DOE-specific occupational radiation protection record-keeping
requirement.
The RCS provides detailed information concerning various aspects of records management programs, including
record-keeping standards. The RCS provides detailed technical guidance concerning employee records,
radiological control procedures, area monitoring, and instrumentation and control. The information provided by
the RCS, used in conjunction with this Guide, will assure that a records management program will meet the
record-keeping requirements and relevant DOE contractual requirements.
4 DOE G 441.1-11
05-20-99
4. IMPLEMENTATION GUIDANCE
This section describes acceptable methods for conducting a functional and effective program for generating and
administering occupational radiation protection program records and reports. An acceptable radiation protection
records program should:
• be implemented by individuals who are knowledgeable of the record-keeping requirements. Guidance on
appropriate education, training, and skills is provided in the RCS and in DOE G 441.1-1, MANAGEMENT
AND ADMINISTRATION OF RADIATION PROTECTION PROGRAMS GUIDE (DOE 1999b);
• have documented policies and procedures for record and report generation and administration;
• demonstrate accuracy, completeness, timely record and report generation, and retrieval capability; and
• maintain documents that are traceable, trackable, verifiable, and retrievable, to substantiate historical events.
Unless otherwise specified, all radiation protection program records and reports shall use the special radiological
units of curie, rad, roentgen, and rem, including their multiples and subunits (10 CFR 835.4). Certain radiological
conditions, such as surface contamination levels, are provided in 10 CFR 835 in alternate units (e.g., dpm/100cm2),
and should be so recorded in facility records and reports. The international system of units may be used to
facilitate calculations, but final records and reports should always be provided in the required units.
4.1 RECORDS TO BE GENERATED AND MAINTAINED
Required records include individual monitoring and dose, workplace monitoring and control, and administrative
records
Section 4
4.1.1 Individual Monitoring and Dose Records
10 CFR 835.702(a) and (b) require maintenance of monitoring results to document doses received by:
• all individuals monitored pursuant to 10 CFR 835.402;
• all individuals who received unplanned doses exceeding the monitoring threshold;
• all individuals who receive doses as a result of planned special exposures and authorized emergency
exposures; and
• all individuals for whom monitoring was provided, but not required under 10 CFR 835.402.
Individual monitoring records shall be sufficient to evaluate compliance with the regulatory provisions for internal
and external exposures (10 CFR 835.702(c)(1)). These records shall be sufficient to provide dose information
necessary to complete mandated reports to individuals (10 CFR 835.702(c)(2)).
10 CFR 835.702(d) requires that documentation of all occupational doses received during the current year be
obtained to assure individuals do not exceed the dose limits provided in 10 CFR 835.202(a). A written estimate
signed by the individual may be accepted if complete records documenting previous occupational dose during the
year cannot be obtained. Doses from planned special exposures conducted in accordance with 10 CFR 835.204 and
emergency exposures authorized in accordance with 10 CFR 835.1302(d) are not included when determining
compliance with the occupational dose limits.
Individual monitoring records identified with a specific individual shall be readily available to that individual (10
CFR 835.702(f). Individuals should be informed as to how they may access their records. Guidance on reports to
individuals is provided in section 4.2 of this Guide. See section 4.3 for Privacy Act considerations.
DOE G 441.1-11 5
05-20-99
Each individual’s dose records should be identified by the following information, as appropriate:
• full name;
• social security number, employee, or other unique identifying number;
• date of birth;
• sex;
• employment status;
• occupation code;
• facility type or building number; and
• organization code.
4.1.1.1 Internal Doses
10 CFR 835.702(c)(4) requires that individual internal dose records include the committed effective dose
equivalent, the committed dose equivalent to any organ or tissue of concern, and the identity of the radionuclide(s).
These records should also typically include the estimated intake to facilitate future reassessments of doses (see 10
CFR 835.702(g)); however, the estimated intake is not needed for determination of dose from certain forms of
some radionuclides, such as tritiated water vapor or elemental tritium. In these cases, the intake need not be
recorded. In cases where intakes are detected or confirmed in a year subsequent to the year of the intake, the
CEDE should be attributed to the known or assumed year of the intake, and all records and reports for that year
should be amended as appropriate. Records of the results of air monitoring when used to determine individual
occupational dose shall be documented and maintained (10 CFR 835.703(b).
Internal dosimetry technical basis documentation should be developed and should include technical methods,
supporting evidence, and reference information used to provide the technical foundation for the internal dosimetry
program. The technical basis documentation should be controlled and retained as a radiation protection program
record. Guidance for determining individual internal doses is provided in DOE G 441.1-3, INTERNAL
DOSIMETRY PROGRAM GUIDE (DOE 1999c).
Section 5
Special radiobioassay measurements should be performed following suspected or confirmed intakes. The extent of
the investigation and the number and frequency of these radiobioassays should be determined and documented on
an individual, case-specific basis, taking into account the potential magnitude of the intake, the effective clearance
half-time, the health of the worker, and the number of measurements needed to evaluate the internal dose.
Additional guidance for recording and reporting internal doses and related information is provided in Section 9,
Records and Reporting, of DOE-STD-1121-98, INTERNAL DOSIMETRY (DOE 1998b). Record-keeping and
reporting of internal doses and related information should be in accordance with this standard.
4.1.1.2 External Doses
10 CFR 835.702(c)(3) requires that individual external dose records include the effective dose equivalent, lens of
the eye dose equivalent, shallow dose equivalent to the skin, and shallow dose equivalent to the extremities. When
the lens of the eye is not specifically monitored, the skin dose (shallow dose equivalent) may be used to determine
regulatory compliance. When the extremities are not specifically monitored, the dose to the skin of the whole body
(shallow dose equivalent) may be used for determination of regulatory compliance.
When the extremities are specifically monitored, the dose should be recorded as dose equivalent to 1) hands and
arms below the elbows and, separately, 2) feet and legs below the knees. When both left and right extremities are
monitored, the higher dose equivalent should be recorded.
6 DOE G 441.1-11
05-20-99
When an individual is provided multiple dosimeters, the dose measured by the highest responding dosimeter on the
whole body should be assigned as the whole body dose of record (see Section 4.4.2 of DOE G 441.1-4,
EXTERNAL DOSIMETRY PROGRAM GUIDE, for special considerations (DOE 1999d)). When multiple
dosimeters are employed more than once during the year, dosimeter results may be summed by location and the
highest total assigned as the whole body dose of record. However, sufficient records should exist to demonstrate
that the dose to portions of the whole body between the monitoring locations did not exceed that recorded for the
monitoring location.
When personnel dosimeter measurements are not available, a dose evaluation should be performed for that period,
if necessary. These estimated or assigned doses shall be clearly recorded and maintained as such (10 CFR
835.702(a) and (g)). When area monitoring results are used to estimate individual dose, the results of surveys,
measurements and calculations used to determine individual occupational exposure from external sources shall be
recorded (10 CFR 835.703(b)).
A technical basis document should be developed for the external dosimetry program to provide (or provide
reference to) the regulatory, scientific, and technical foundation of the program. The technical basis document
should be handled as a controlled document and retained as a RPP record. Guidance to determine individual
external doses is provided in DOE G 441.1-4.
The number of fixed nuclear accident dosimeter units, their locations, the effect of intervening shielding, and an
analysis demonstrating these performance criteria should be documented in the technical basis document.
4.1.1.3 Summation of Internal and External Doses
Section 6
10 CFR 835.702(c)(5) requires that individual dose records include the total effective dose equivalent, the total
organ dose equivalent, and the cumulative total effective dose equivalent (see guidance regarding lifetime
occupational dose, below). When only internal or external dose has been monitored, then the summed doses will
be equivalent to the component of the dose (internal or external) that has been monitored.
4.1.1.4 Lifetime Occupational Dose
For each radiological worker monitored in accordance with 10 CFR 835.402 (i.e., the radiological worker’s dose is
expected to exceed the monitoring threshold(s)), efforts shall be made to obtain records of prior years’ occupational
dose (10 CFR 835.702(e)). Efforts to obtain such records should include at least three written requests to each
prior employer. If the prior employer is non-responsive or complete records cannot be obtained for any reason, a
written estimate signed by the worker may be accepted.
10 CFR 835.204(b) requires that an individual's dose from all previous planned special exposures and all doses in
excess of the occupational dose limits be determined prior to requesting the individual to participate in a planned
special exposure. For this situation, estimates of dose from previous planned special exposures and estimates of
doses in excess of the limits are not permitted for meeting the requirements of 10 CFR 835.204(b). The records of
prior years exposure required by 10 CFR 835.204(b) need only be obtained for radiological workers who are chosen
and elect to participate in a planned special exposure.
On the basis of available dose records and written estimates, records of each radiological worker’s cumulative total
effective dose equivalent shall be maintained (10 CFR 835.702(c)(5)(iii)) and efforts should be made to determine
the lifetime occupational dose of each radiological worker who is monitored in accordance with 10 CFR 835.402.
The contribution to an individual’s lifetime occupational dose since January 1, 1989, should be recorded as
CTEDE. DOE did not require determination of CEDE prior to January 1, 1989; consequently, annual TEDE
information may not be available. While determination of CEDE for internal exposures received prior to January 1,
1989, is recommended to improve the consistency of available information, such conversion may not be possible
due to resource or data limitations. If conversion to CEDE is not possible or practical, all available dose and intake
data should be recorded.
DOE G 441.1-11 7
05-20-99
4.1.1.5 Non-Uniform Exposure to the Skin
Non-uniform exposures to the skin (such as from non-penetrating radiation or skin contamination) shall be
recorded in the individual’s dose record and included in the dose equivalent to the skin for the year if the area of
skin exposure equals or exceeds 10 cm2 and the dose equals or exceeds 1 rem (10 CFR 835.205(b)(1) and (2) and
10 CFR 835.702(b)). If the dose does not exceed 1 rem, the dose may be included in the individual’s dose records
as dose equivalent to the skin, but in any case, records of the dose assessment should be maintained. If the dose
exceeds 1 rem and the area of the skin exposure is less than 10 cm2, the dose shall be recorded as a special entry in
the individual's dose record, but shall not be included in the dose equivalent to the skin for the year (10 CFR
835.205(b)(3)).
Section 7
If the exposure to the skin is to the hands or arms below the elbows or feet and legs below the knees, the dose
should be included in the shallow dose equivalent to the extremity for the year. Otherwise the dose should be
recorded as shallow dose equivalent to the skin.
4.1.1.6 Planned Special Exposures (PSEs)
The dose resulting from PSEs shall not be considered in controlling future occupational dose to the individual
under 10 CFR 835.202(a), but shall be included in the records and reports required by 10 CFR 835 (10 CFR
835.204(f)). Doses resulting from PSEs should be included in the determination of the individual’s yearly doses,
CTEDE, and lifetime dose. These doses are not considered in the individual’s yearly dose when demonstrating
compliance with the dose limits in 10 CFR 835.202(a). Doses resulting from PSEs should be recorded and treated
separately, even if the dose does not exceed the value of the dose limits provided in 10 CFR 835.202(a).
4.1.1.7 Doses Resulting from Emergency or Accidental Exposures
The dose received from an authorized emergency exposure or unplanned exposure exceeding the applicable
monitoring threshold shall be documented in each individual's dose record (10 CFR 835.702(a)). Doses resulting
from accidents shall be included in assessments with compliance with the dose limits provided in 10 CFR 835 (10
CFR 835.2(a), Occupational dose). Doses resulting from authorized emergency exposures shall not be considered
in assessments of compliance with the regulatory dose limits and should not be considered in controlling the
affected individual’s future routine occupational exposure under 10 CFR 835.202(a).
4.1.1.8 Records of Embryo/Fetus Dose and Declared Pregnant Workers
Records pertaining to the embryo/fetus and the declared pregnant worker shall include:
• the dose equivalent to the embryo/fetus of a declared pregnant worker (10 CFR 835.702(c)(6));
• the written declarations of pregnancy for the individual, including estimated conception date (10 CFR
835.704(d)); and
• the written revocations of declarations of pregnancy for the individual, if any (10 CFR 835.704(d)).
Other records that should be maintained include:
• any work restrictions imposed;
• any counseling performed;
• monitoring performed (e.g., dosimeter placement, bioassay frequency, supporting workplace monitoring); and
• records of reports provided.
Guidance for determining dose to the embryo/fetus may be found in DOE G 441.1-6, EVALUATION AND
CONTROL OF RADIATION DOSE TO THE EMBRYO/FETUS GUIDE (DOE 1999e).
8 DOE G 441.1-11
05-20-99
4.1.1.9 Individual Monitoring Program Records
Data that are necessary to support or recalculate doses at a later date shall be retained (10 CFR 835.702(g)).
Records that should be retained include the following:
• the monitoring program technical basis documents and any changes;
• decisions to include or exclude program participants and the monitoring results (individual and workplace)
supporting these decisions;
• calculations of dose based on workplace monitoring data, when performed;
• sample collection dates, times, volumes, analysis results, and dose assessment;
• models used (i.e., individual specific parameters versus Reference Man, etc.);
• records of program accreditation, exceptions from accreditation, or other approvals;
• contractual arrangements for contractor dosimetry services;
• program cross-checks;
• instrument capability, calibration and functional tests;
Section 8
• workplace monitoring results;
• results of trend analyses;
• monitoring device issue, return, readings, dose assessment, inter-device agreement, and investigations;
• dosimeter relocation or multibadge issue, as appropriate;
• field correction factors used;
• calculations of external dose from airborne radionuclides and surface, skin, or clothing contamination; and
• employee radiological safety concerns that have been formally investigated.
4.1.1.10 Equipment Capabilities
The capabilities of radiation monitoring instruments, including individually worn dosimeters, should be
documented. Recorded information should include the identification, description, and functional specifications
and the results and date of any acceptance or performance tests that are performed to demonstrate equipment
capabilities with regard to sensitivity, range, and energy dependence (ANSI N13.6). Additionally, records of
computer program capabilities, limitations, and validation and verification should be maintained.
4.1.2 Monitoring and Workplace Records
This section applies to the records that may be required to establish the conditions under which individuals were
exposed to radiation or radioactive material. These records supplement the individual dose records that are based
on individual monitoring. In some cases, workplace records provide the only means for estimating individual
doses. These records are also helpful in assessing the overall quality and effectiveness of the radiation protection
program. The following information shall be documented and maintained:
• results of monitoring for radiation and radioactive material as required by Subparts E and L of 10 CFR 835
(except for that monitoring required by 10 CFR 835.1102(d)) (10 CFR 835.703(a));
DOE G 441.1-11 9
05-20-99
• results of monitoring used to determine individual occupational dose from external and internal sources (10
CFR 835.703(b));
• results of monitoring for the release and control of material and equipment as required by 10 CFR 835.1101
(10 CFR 835.703(c)); and
• results of maintenance and calibration performed on instruments and equipment as required by 10 CFR
835.401(b) (10 CFR 835.703(d)).
4.1.2.1 Radiation Safety Analysis and Evaluation Records
Reports of initial evaluations and periodic re-evaluations of the long-term radiation protection aspects of a work
area, equipment, or specific location should be retained. These evaluations may be used to supplement the
monitoring that is required for transient conditions. The details and content of the evaluation reports depend upon
the purpose of the report, the nature of the operation, and the associated potential hazards. The evaluation report
should include or make reference to:
• descriptions of the facility, equipment, and nature of the operation, including modifications to any facilities,
equipment or operations;
• design criteria for systems, components, and structures;
• identification of potential hazards, including the types and magnitude of the sources of radiation allowed in the
facility, and the nature and magnitude of those found during the review;
• training and experience requirements for individuals employed in the operation;
• probability of occurrence and predicted consequences of hazards expressed in quantitative terms where
feasible;
• physical design features and administrative controls provided to prevent or mitigate potential accidents;
Section 9
• the scope of the periodic surveillance program and the radiation instrumentation required;
• the appropriate emergency actions to be taken in the event of accidents;
• operational limitations; and
• identification of the individual(s) who made the evaluation.
4.1.2.2 Work Authorizations
Written authorizations shall be required to control entry into and perform work within radiological areas (10 CFR
835.501(d)). Records of these authorizations shall be maintained (10 CFR 835.701(a)) and should include the
information provided in Chapter 3, Part 2 of the RCS pertaining to preparation of RWPs. The RCS also provides
guidance regarding the preparation and use of written work authorizations, such as RWPs and technical work
documents. The supporting records, such as monitoring records used to prepare work authorizations, should be
linked so that reference can be made to the data when required.
4.1.2.3 Area and Material/Equipment Monitoring Records
Results of area and material/equipment monitoring activities should be recorded on appropriate standard forms (to
the extent practicable) and include the following common elements:
• date, time, and purpose of the monitoring activity;
10 DOE G 441.1-11
05-20-99
• general and specific location monitored;
• name and signature of the individual performing the monitoring;
• pertinent information needed to interpret the monitoring results;
• reference to a specific work authorization if the monitoring is performed to support the authorization;
• model and serial number of the instrument (locations of fixed instruments may be used as identifiers where the
model and serial numbers are not available).
The value of some types of area monitoring is enhanced by the use of sketches of building, room, or equipment
layouts to clearly define the areas monitored and results observed. Monitoring of certain items however, may be
adequately documented by simply describing the item and its radiological status. Additional records that should be
maintained include:
• the technical bases for assumptions on which the monitoring program is based, including radionuclide
inventories, system functions, specific activities involving radioactive materials, and air flow studies;
• records of alarms and alarm responses;
• placement of fixed dosimeters and nuclear accident dosimeters;
• results of samples, including location, time, occupancy, volume, radionuclides, concentrations, counting
equipment data, etc.;
• field analysis and follow-up analysis results;
• pertinent facility conditions when monitoring is performed;
• corrective actions resulting from performance of monitoring;
• personnel and area decontamination records; and
• times and dates as necessary to assess compliance with time sensitive requirements, such as receipt of material
from radioactive material transportation.
Many facilities employ area monitoring instrumentation that records on charts the radiation levels in work
locations. The record on the chart should include, or be directly linked to, the information described in ANSI
N13.6.
See Chapter 7, Part 5 of the RCS for additional guidance concerning radiation and contamination monitoring
records.
4.1.2.4 Airborne Radioactivity Monitoring Records
In addition to the guidance provided in section 4.1.2.3, the results of monitoring for airborne radioactivity shall be
documented and maintained (10 CFR 835.703(a)) and should include:
• measured airborne radioactivity concentrations in general areas and breathing zones;
Section 10
• supporting parameters, including collection efficiency, flow rate, duration of sampling, correction factors, and
filter medium;
• individual DAC-hour calculations, when performed; and
DOE G 441.1-11 11
05-20-99
• linkage of air sample results to individuals in the area, when monitoring results will be used for individual
dose assessment or exposure control.
Airborne monitoring program records should include:
• the technical basis for alarm set points for real-time monitors;
• the technical basis for air sampling and real-time air monitoring equipment selection, placement, and
operation; and
• any adjustments to DACs.
When air monitors with chart recorders are used, the following additional information should be recorded on the
chart or be directly linked to the chart:
• type of instrument, e.g., fixed filter or moving tape;
• tape and chart speed;
• identity of scale or range of operation; and
• specific calibration and relationship between the chart divisions and the concentration of the airborne
radioactive material depending on the tape speed and flow rate of a moving filter unit or the flow rate of a
fixed filter unit.
4.1.2.5 Records of Releases of Materials and Equipment from Radiological Areas
Records of monitoring for the release and control of material and equipment as required by 10 CFR 835.1101 shall
be documented and maintained (10 CFR 835.703(c)). These records should contain the following:
• description of the material or equipment;
• date on which the material or equipment was monitored;
• type and identification number of the survey instrument used;
• results of the monitoring; and
• identification of the individual(s) who performed the monitoring.
When the material to be released consists of many small or identical items, then the material may be described in a
general manner (e.g., “box of tools” or “pallet of lumber”). Large or unique items should be specifically identified
by identification number, if available.
4.1.3 Administrative Records
This section applies to the administrative records that describe various elements of the radiation protection
program.
The following records shall be maintained:
• training records, as necessary, to demonstrate compliance with 10 CFR 835.901 (10 CFR 835.704(a)).
12 DOE G 441.1-11
05-20-99
• actions taken to maintain occupational exposures ALARA, including the actions required for this purpose by
10 CFR 835.101, as well as facility design and control actions required by Subpart K of 10 CFR 835 (10 CFR
835.704(b));
• results of internal audits and other reviews of program content and implementation (10 CFR 835.704(c)); and
• changes in equipment, techniques, and procedures used for monitoring (10 CFR 835.704(e)).
4.1.3.1 Radiation Safety Training
Records of radiation safety training are essential to show that each individual received appropriate training.
Records shall be maintained, as necessary, to demonstrate compliance with 10 CFR 835.901 (10 CFR 835.704(a)).
These records should include documentation of on-the-job and practical factor training as well as formal classroom
training. Training and qualifications records should be readily available to first-line supervision and management
to aid in work assignment.
Course-related items, including all revisions and dates used, that should be retained include the following:
• the course title and outline or syllabus;
• copies of handouts distributed to the attendees;
• instructor's manuals and lesson plans;
Section 11
• copies or transcriptions of any video and audio training that is provided;
• attendance sheets showing dates, attendees’ names and signatures, and names of instructors;
• documentation of job-specific training, such as radiological procedures, RWP procedure, and special training
requirements, pre-job briefings, and mockup training;
• documentation of exceptions to training requirements and extension of qualifications;
• on-the-job training records;
• records demonstrating the practical application of a learned skill;
• copies of any certificates issued;
• the basis for decisions to alter standard course content for specific candidates due to prior education,
experience, escort provided, etc.;
• program accreditation records;
• effectiveness evaluations and actions in response;
• training/briefings provided between full training cycles;
• basis for site/facility-specific materials;
• individual tests, or if a test bank is used, the test series number and a copy of the bank and the series code; and
• confirmation of satisfactory completion of training.
DOE G 441.1-11 13
05-20-99
If training or qualifications received at other locations are to be accepted in place of training, documentation
should be obtained and placed in the individuals’ training records. Additional guidance on training records may
be found in the RCS.
4.1.3.2 ALARA Records
Actions taken to maintain occupational exposures ALARA, including actions required by the RPP, as well as
facility design and control actions shall be documented (10 CFR 835.704(b)). As discussed in DOE G 441.1-2,
OCCUPATIONAL ALARA PROGRAM GUIDE (DOE 1999f), this documentation includes formal plans and
measures for applying the ALARA process to occupational doses. This documentation should include the
following, to the extent the programmatic elements are used in the specific program:
• the ALARA committee charter, membership, and meeting minutes;
• implementation of administrative control levels;
• forms demonstrating approval to exceed administrative control levels;
• dose, intake, and personnel contamination investigation forms;
• radiological performance goals, status, and annual performance records;
• pre-job briefing, with content and attendance;
• post-job reviews, with dose estimates, and actual doses received;
• collective doses received by the total facility, by specific work groups, and for specific high dose jobs;
• annual or special ALARA reports, e.g., dose/dosimetry trend data;
• records of ALARA design review;
• results of optimization analysis;
• work planning, including procedures and technical work documents;
• work authorizations, including RWPs;
• records of ALARA job/experiment review; and
• ALARA training records.
Formally documented optimization methodologies should be developed for ALARA reviews and decisions on
implementation of ALARA efforts. The degree of formality should be commensurate with the radioactive material
contamination and dose potential. Chapter 1 of the RCS provides additional guidance on the degree of program
formality.
All documents and legal records used to demonstrate compliance with the requirements for an ALARA program
should be reviewed and approved by supervisory or line management.
4.1.3.3 Facility Design
Records necessary to evaluate compliance with the design and control requirements of Subpart K of 10 CFR 835
shall be maintained (10 CFR 835.701(a)). These records should include the following:
Section 12
14 DOE G 441.1-11
05-20-99
• the design and control considerations documenting the rationale for selecting physical controls or
administrative controls, when necessary;
• the design criteria used and technical basis for these criteria;
• the optimization methodology employed for facility design and modifications;
• the technical basis for design objectives;
• the results of design reviews, including features that facilitate operations, maintenance, decontamination, and
decommissioning; and
• the technical basis for workplace controls used.
4.1.3.4 Entry and Access Control Records
Records necessary to evaluate compliance with 10 CFR 835.501 shall be maintained (10 CFR 835.701(a)). These
records should include the following:
• system/device design, test criteria, and data;
• system/device failure and corrective actions;
• assessments of adequacy for actual and design conditions; and
• administrative controls used in lieu of physical controls.
4.1.3.5 Sealed Radioactive Sources
Records shall be maintained as necessary to evaluate compliance with the requirements of 10 CFR 835.1201 and
10 CFR 835.1202 for sealed radioactive source control, inventory, and source leak tests (10 CFR 835.704(f)).
Records that should be maintained include:
• source acquisition, monitoring, leak tests, inventories, loss;
• storage and use locations;
• investigations conducted; and
• exceptions taken due to source inaccessibility or sources taken out of service.
See Chapter 7, Part 5 of the RCS for additional guidance concerning sealed radioactive source leak tests and
inventories records.
4.1.3.6 Radiation Protection Program, Policies and Procedures
Documentation supplementing the approved RPP should be developed and maintained to demonstrate that an RPP
can be effectively managed and administered to achieve compliance with 10 CFR 835. This documentation should
include a site radiological control manual, detailed implementing procedures, appropriate management policy
statements, and technical basis documentation. While this documentation need not be part of the RPP, it should be
clearly linked to the compliance commitments contained in the RPP. Records of this documentation should be
recorded in accordance with ANSI N13.6. All policies and procedures should have effective dates.
Documentation of changes made to the RPP without prior DOE approval should include the rationale applied to
such changes and should be retained for future reference and demonstration of compliance.
DOE G 441.1-11 15
05-20-99
Programmatic documentation should be developed to document the organizational and administrative aspects of
the RPP.
Records shall be maintained, as necessary, to demonstrate that individuals who are responsible for the development
and implementation of measures necessary to ensure compliance with 10 CFR 835 have the appropriate education
training, and skills to execute these responsibilities (10 CFR 835.103 and 701(a)). These records should include
records of the training provided in accordance with Chapter 6, Parts 4 and 5 of the RCS.
If the provisions of 10 CFR 835.3(e) are exercised, documentation of the schedule deviation should be developed
and include a discussion of the specific activity involved and the reason for the schedule deviation.
Revisions to procedures, policies, or methods of evaluation used for monitoring shall be documented (10 CFR
835.704(e)). The original document and all approved revisions of subject documents should also be retained.
Section 13
4.1.3.7 Audits and Programmatic Reviews
Assessments of radiation protection programs by external agencies and internal groups are valuable in determining
the adequacy of the program. Records shall be maintained to document the results of internal audits and other
reviews of program content and implementation (10 CFR 835.704(c)). These records should include records of
corrective actions and audit procedures.
4.1.3.8 Posting and Labeling
Records necessary to evaluate compliance with the posting and labeling requirements of 10 CFR 835 shall be
maintained (10 CFR 835.701(a)). These records should include the following:
• documentation of area postings on area monitoring records. These records need not show the placement of
each sign, but should be adequate to demonstrate that areas are posted consistent with the radiological
conditions recorded on the monitoring record;
• variance from facility design parameters;
• documentation of compensatory measures implemented to obviate the need for posting; and
• long term changes in postings.
4.1.3.9 Calibration, Functional Tests, and Maintenance Records
Calibration and maintenance procedures, criteria, and schedules for dosimeters and radiation protection
instruments are important to demonstrate their dependability, reliability, and accuracy. The results of maintenance
and calibration performed on instruments and equipment used for monitoring shall be recorded (10 CFR
835.703(d)). These records should include equipment, sources, and fields used, results of initial (as found) tests
and post-adjustment tests, and corrective actions taken for instruments found to be out of calibration or inoperable.
The calibration laboratory should maintain the following sets of documentation: (1) the laboratory protocol; (2)
the laboratory records; and (3) the calibration records. Historical records should be maintained to detail any
changes or revisions in procedures or protocols.
The performance of functional tests during use of portable monitoring instruments in the field should be
appropriately documented. This may be as simple as a check-list on the survey sheet.
4.2 REPORTS
Many reports are prepared for a variety of purposes by the radiation protection program. This section describes the
reports required by the previously cited references.
16 DOE G 441.1-11
05-20-99
4.2.1 Reports to Individuals
Each individual monitored in accordance with 10 CFR 835.402 shall be provided an annual report of his/her dose
(10 CFR 835.801(c)). The report shall include, at a minimum the data required under 10 CFR 835.702(c), and the
following additional information (10 CFR 835.801(a) & (c)):
-- The DOE site or facility name;
-- the name of the individual, and;
-- the individual’s social security number, employee number, or other unique identification number.
Individuals who were not monitored in accordance with 10 CFR 835.402 but who were determined to have
received an occupational dose in excess of any of the monitoring thresholds of 10 CFR 835.402 should also be
provided an annual report of his/her dose. This report should also include the information discussed above.
DOE O 231.1, ENVIRONMENT, SAFETY AND HEALTH REPORTING (DOE 1996), and DOE M 231.1-1,
ENVIRONMENT, SAFETY AND HEALTH REPORTING MANUAL (DOE 1995), provide additional detailed
information with respect to occupational dose reporting requirements.
Whenever a report concerning radiation protection matters is written about or to an individual, a copy of the report
should be placed in the individual's dose records.
Section 14
4.2.1.1 Records Requested by Monitored Individuals
Detailed information on any individual's exposure shall be made available to him/her upon request, consistent with
the provisions of the Privacy Act (PA 1974) (10 CFR 835.801(d)). See section 4.3 of this Guide for Privacy Act
considerations. Requests for exposure information should be answered as soon as possible. At a minimum, the
response should provide the information supplied on the termination report. Other data that may be requested by
the individual should be supplied if available.
4.2.1.2 Termination Dose Reports
10 CFR 835.801(b) requires that a termination dose report be provided only upon request of the individual
terminating employment. This requirement includes visiting scientists and transient workers, such as technicians,
and specialists who perform work at a facility and then leave to work elsewhere. The termination dose report shall
be provided to the requesting individual as soon as data are available, but not later than 90 days after termination.
10 CFR 835.801(b) also requires that a written estimate of the radiation dose received by the individual based on
available information shall be provided at the time of termination, if requested. The provisions for termination
dose reports and written estimates only apply if the individual requests this information on or before the
individual’s last day of employment. If the request is made after the termination date, then the request should be
handled in accordance with 10 CFR 801(d). When a termination dose report is provided to an individual, then an
annual report to that individual, under 10 CFR 801(c), is not necessary.
4.2.1.3 Reports to DOE
Reports identifying a specific individual and his or her exposure data may be required to be sent to DOE. These
reports include occurrences reported under DOE O 232.1A, OCCURRENCE REPORTING AND PROCESSING
OF OPERATIONS INFORMATION (DOE 1997b), of exposure of an individual to radiation and/or radioactive
material, or planned special exposures conducted in accordance with 10 CFR 835.204(e). Under 10 CFR
835.801(e), each individual specifically identified in such reports shall be provided a report on his or her exposure
data included in the report to DOE at a time not later than the transmittal to DOE. A separate report should be
provided to each affected individual discussing the nature and content of the report to DOE and his or her exposure
data contained in the DOE report. Alternatively, a copy of the report sent to DOE may be sent to each affected
individual to satisfy this requirement. Privacy Act restrictions shall be considered since DOE report may contain
personal information concerning other affected individuals.
DOE G 441.1-11 17
05-20-99
4.2.2 Reports of Planned Special Exposures
A written report of the conduct of a planned special exposure shall be submitted to the cognizant Program Office
and the Secretarial Officer responsible for environment, safety and health matters (currently the Assistant Secretary
for Environment, Safety and Health) within 30 days after the exposure (10 CFR 835.204(e)). This written report is
required even though the actual doses may not have exceeded the values of occupational dose limits established in
10 CFR 835.202.
The report should address, but need not be limited to:
• a description of the circumstances requiring the use of a planned special exposure;
• identification of involved individuals, including exposed individuals, supervisors, approving management and
DOE personnel;
Section 15
• date(s) on which the exposure(s) occurred;
• estimated and actual personnel doses, including doses received by affected individuals before the planned
special exposure; and
• records of ALARA plans, work authorizations, briefings, approvals, and other work documentation.
4.3 PRIVACY ACT CONSIDERATIONS
Any system of records that retrieves information concerning individuals by personal identifiers, such as name, any
identifying numbers (e.g., Social Security Number or payroll number), symbol, or other identifying particulars
assigned to the individual, is subject to the Privacy Act. The principal records that would apply in this guide are
the individual radiation dose records. Other records, such as program records, are subject to the FOIA.
No information on an individual should be revealed to anyone other than the individual, DOE, or DOE contractor
personnel who have a need to know without prior written consent of the individual, unless authorized by the
Privacy Act or for routine uses as published periodically in the Federal Register. Records of deceased individuals
are not covered by the Privacy Act, but are subject to the FOIA.
The following subsections discuss applicable parts of the Privacy Act as implemented by DOE through 10 CFR
1008 (DOE 1980).
4.3.1 Informing Individuals
Individuals about whom information will be collected should be informed of the authority for collection of the
information, the principal and routine uses of the information, and the effects of not furnishing the information.
4.3.2 Identifying Individuals
10 CFR 1008.4 sets forth procedures for identifying the individual making a request for access to, information
from, or amendment of his/her records. Identification of the individual should be established by one of the
following three methods:
• if making a request by mail, a photocopy of two identifying documents bearing his/her name and signature
must be submitted, one of which should bear his/her current home or business address and date of birth;
• if appearing in person, the individual must present either one identifying document bearing his/her photograph
and signature or two identifying documents bearing his/her name and signature, one of which should bear
his/her birth date and current home or business address; or
18 DOE G 441.1-11
05-20-99
• the individual can provide other proof of identity that the Privacy Act Officer deems satisfactory in the
particular circumstances.
4.3.3 Requesting Correction or Amendment of a Record
If an individual requests a correction or amendment to his/her records, the record shall be changed or the Privacy
Act Officer shall inform the requestor that the change has been denied. The denial should include the record
system manager's name and title, the reasons for the denial, notification of the individual's right to appeal the
denial, and the individual's right to submit a statement of disagreement.
4.3.4 Responding to Requests
Every reasonable effort should be made to respond with the requested material, correction, or amendment within
10 days. Response should be made within 20 days unless unusual circumstances prevail. If a response cannot be
made within 10 days, an interim response should be made providing information on the status of the request and
an estimate of when the response will be made.
4.3.5 Accounting for Disclosures
An accounting of all disclosures of information, except those to DOE and DOE contractor personnel with a need to
know or those required by the FOIA, should be maintained as prescribed by the Privacy Act.
Section 16
4.4 RECORD-KEEPING STANDARDS
Records shall be retained until final disposition is authorized by DOE (10 CFR 835.701(b)). Individual dose
records shall be transferred to DOE upon cessation of activities at the site that could cause exposure to individuals
(10 CFR 835.702(h)).
General standards for maintenance and retention of radiation protection records, including media, media
conversion, corrections, retention, and retrievability, are provided in the RCS.
DOE G 441.1-11 19 (and 20)
05-20-99
5. REFERENCES
AEC (Atomic Energy Commission) 1954. Atomic Energy Act of 1954, as amended. Public Law 83-703 (68 Stat.
919), Title 42 U.S.C. sec. 2011.
ANSI (American National Standards Institute) 1989. American National Standard Practice for Occupational
Radiation Exposure Records Systems. ANSI N13.6-1966 (R1989), New York, New York.
FOIA (Freedom of Information Act) 1986. Public Law 99-570, Title 5 U.S.C. sec. 552.
DOE (U.S. Department of Energy) 1980. 10 CFR 1008. U.S. Department of Energy, Records Maintained on
Individuals (Privacy Act). 45 FR 61576, Federal Register, Vol. 45, No. 237, dated 9-16-80. Washington, D.C.
DOE 1995. DOE M 231.1-1. ENVIRONMENT, SAFETY AND HEALTH REPORTING MANUAL, U.S.
Department of Energy, dated 9-30-95, Washington, D.C.
DOE 1996. DOE O 231.1. ENVIRONMENT, SAFETY AND HEALTH REPORTING, U.S. Department of
Energy, dated 11-7-96, Washington, D.C.
DOE 1997a. 10 CFR 820. U.S. Department of Energy, Procedural Rules for DOE Nuclear Activities. 58 FR
43680, Federal Register, Vol. 58, No. 157, dated 10-8-97. Washington, D.C.
DOE 1997b. DOE O 232.1A. OCCURRENCE REPORTING AND PROCESSING OF OPERATIONAL
INFORMATION, U.S. Department of Energy, dated 7-21-97, Washington, D.C.
DOE 1998a. 10 CFR 835. U.S. Department of Energy, Occupational Radiation Protection. 63 FR 59662.
Federal Register Vol. 63, No. 213, dated 11-4-98. Washington, D.C.
DOE 1998b. DOE-STD-1121-98, INTERNAL DOSIMETRY, under development at time of publication.
Washington, D.C.
DOE 1999a. DOE-STD-1098-99. RADIOLOGICAL CONTROL, under development at time of publication.
Washington, DC.
DOE 1999b. DOE G 441.1-1. MANAGEMENT AND ADMINISTRATION OF RADIATION PROTECTION
PROGRAMS GUIDE, dated 3-17-99. Washington, D.C.
DOE 1999c. DOE G 441.1-3. INTERNAL DOSIMETRY PROGRAM GUIDE, dated 3-17-99. Washington, D.C.
DOE 1999d. DOE G 441.1-4. EXTERNAL DOSIMETRY PROGRAM GUIDE, dated 3-17-99. Washington,
D.C.
DOE 1999e. DOE G 441.1-6. EVALUATION AND CONTROL OF RADIATION DOSE TO THE
EMBRYO/FETUS GUIDE, under development at time of publication. Washington, D.C.
DOE 1999f. DOE G 441.1-2, OCCUPATIONAL ALARA PROGRAM GUIDE, dated 3-17-99. Washington, D.C.
NCRP (National Council on Radiation Protection and Measurements) 1992. Maintaining Radiation Protection
Records. NCRP Report No. 114, dated 11-30-92. Bethesda, MD.
PA 1974. Privacy Act of 1974, as amended, Public Law 93-579, Title 5 U.S.C. sec. 552a.
DOE G 441.1-11 Attachment 1
05-20-99 Page 1 (and 2)
UNITED STATES
DEPARTMENT OF ENERGY
Office of Worker Protection Programs and Hazards Management (EH-52/270CC)
19901 Germantown Road, Germantown, MD 20874-1290
Request for Changes to
OCCUPATIONAL RADIATION PROTECTION
RECORD-KEEPING AND REPORTING GUIDE
(Use multiple pages as necessary.)
Page No. ___________
Section No. _________
Paragraph No. ____________
Facility Requesting Change:_____________________________
Contact Person:_______________________________________
Section 17
Telephone No./Fax No.:________________________________
Description of Change Request:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
Suggested Specific Word Changes:
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
_______________________________________________________________________________
EH-52 Technical Staff Contact
Peter O’Connell
301-903-5641
EH-52 Technical Staff Contact
Joel L. Rabovsky
301-903-2135
DOE G 441.1-11
Contents
Acronyms
Purpose and Applicability
Definitions
Discussion
Implementation Guidance
References
Attachment 1
Print: